Open-type Fiber Laser Cutting Machine

BM-D series · Laser cutting

The open-type fiber laser cutting machine uses a single worktable with direct access to the sheet. Suitability depends on the material, part geometry and planned loading routine. Define the working area and laser configuration through drawings and edge requirements rather than a power figure alone. An open layout does not remove the need for laser protection: assess guarding, site segregation and fume extraction against local requirements and the actual equipment configuration.

Single-table layout: Assess sheet dimensions together with the planned direct loading and unloading.
Profile assessment: Discuss the cutting process using part drawings and specified edge requirements.
Site protection: Review laser protection, segregation and extraction against applicable local installation requirements.

Enquire about this product View category

Zhongao Open-type Fiber Laser Cutting Machine

Specify the material and nesting envelope

The open single-table layout provides direct loading access. The installation still requires a reviewed laser-safety arrangement, fume extraction and suitable site conditions.

Listed working areas and laser powers are selection options to confirm, not a promise that every combination is available. Cutting thickness, edge quality and process speed require material-specific confirmation; they cannot be inferred from laser power alone.

Typical configurations

Working-area options: 3000 × 1500, 6000 × 1500, 4000 × 2000, 6000 × 2000 mm; confirm availability
Laser-power options: 1000 / 1500 / 2000 / 3000 / 4000 W; confirm availability
Laser source, cutting head, extraction and auxiliary gas configuration

APPLICATIONS

Typical applications

Sheet profile cutting

Assess metal profiles and holes using material grades, thicknesses and sample files. Review small holes, fine details and edge requirements, with representative cutting trials where needed.

Mixed fabrication orders

For mixed nesting, define the working envelope around original sheet sizes, layouts and remnant use. Include sheet changes, sorting and cut-part handling when reviewing the production workflow.

Direct loading stations

The single table provides direct sheet access, but loading and cutting must be coordinated on site. Review personnel routes, material paths and protective areas together with the machine layout.

SELECTION NOTES

What to check before selection

Define the material and files: Provide grade, thickness, maximum sheet size and part files, including hole, kerf and edge requirements. Laser configuration alone does not establish cutting thickness or quality; the material needs assessment.
Gas and auxiliary services: Discuss auxiliary gas, supply conditions and extraction against cutting requirements, and confirm site power. Define the laser source, cutting head and auxiliary scope in the quotation.
Open-layout installation: An open layout does not waive laser protection, segregation or fume control. Review personnel access, routes and protective measures against local requirements and equipment configuration, not appearance alone.

Machine photographs illustrate available configurations. Appearance, controller, tooling, protective devices and auxiliary equipment are subject to the agreed supply scope. Final specifications and acceptance requirements are confirmed in the quotation.

START WITH YOUR APPLICATION

Prepare your enquiry

Share the information available using the checklist below to help us review the product against your application. If a complete drawing is not available, start with clear photographs and known dimensions.

Material grades, thickness range and surface condition
Maximum sheet size, sample nesting and part files
Hole details, edge requirements, downstream processes and batches
Available gases, supply conditions and fume extraction arrangements
Site voltage, frequency, segregation layout and destination

A clearer brief. A more useful discussion.

The button below opens an email with a product-specific checklist. Fill in the details you know and attach drawings or photographs in your email client.

Email a technical enquiry

Information is for initial review, not a commitment on compatibility, supply or performance. Final materials, geometry, configuration, lead time and acceptance requirements are subject to the confirmed drawing and quotation.

PRACTICAL QUESTIONS

Practical selection questions

Clarify the operating conditions and interfaces before deciding on materials, geometry or configuration.

Does an open machine remove the need for laser protection?

No. Laser radiation protection, personnel access, segregation and extraction still require review against the equipment configuration and local requirements. Photographs alone cannot establish adequate protective arrangements.

Can laser power alone establish cutting capability?

No. Material grade, thickness, hole geometry, edge requirements and auxiliary gas conditions are also needed. Confirm the working area and laser configuration for the task, with representative trials where appropriate.

How should single-table loading be planned?

Plan loading steps around sheet dimensions, weight, batch size and handling tools, with checks on personnel routes and protective areas. Assess suitability against the complete operating cycle.

Start with your workpiece
We’ll review the machine configuration

Share your material, process, production target and site conditions for a configuration-based quotation.

Email your enquiry